APC Back-UPS Pro BR1500G UPS 1500VA 865W

$199.99

Ships in 1-3 Days


 Add to Wish List


What About This?

Overview

APC Back-UPS Pro, 865 Watts / 1500 VA, Input 120V / Output 120V , Extended runtime model


Features:

BR1500G Features:

  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  • Extendable Run Time: Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
  • Transformer Block Spacing: Connect bulky transformer block plugs without covering up other outlets.
  • Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Hot-swappable batteries” Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Dataline Surge Protection: Provides protection of connected equipment from power surges on the data lines.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Audible alarms: Provides notification of changing utility power and UPS conditions
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • Serial Connectivity: Provides management of the UPS via a serial port.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Safety-agency approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Battery replacement without tools: Allows quick, easy battery replacement.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.

Protection:

  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Unattended shutdown: This ensures that files are saved and the Operating System is properly shutdown in the event of a sustained power outage.
  • Ethernet protection: Shields hardware from damage
  • Addl Surge Protected Outlets: Surge Only outlets offer protection for non-data sensitive equipment like scanners and printers without reducing the unit’s available power or battery capacity. This helps to maximize battery power for equipment that needs it most like a computer and monitor.
  • Site wiring fault indicator: Immediately warns you of wiring problems like improper grounds that could cause shocks or prevent the UPS from adequately suppressing surges. (120V units only)

Availability:

  • Automatic Self Test: Biweekly testing of all internal components, including the battery, ensures your unit is ready when you need it.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Audible alarms: Proactively notifies you of changing UPS and utility power conditions.
  • Easy Overload Recovery: Push-button circuit breaker instead of a standard fuse, eliminates the need to return the unit to the factory for service.
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Convenience:

  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Cold-start: You can power on the unit without any input power. This provides temporary emergency battery power when the utility power is out.
  • User replacable batteries: Save time and money by swapping the battery yourself. There is no need to send the unit to a factory service center.
  • Hot Swap Batteries: You can change the battery without powering down your equipment.

Specs

Technical Information:

  • Plug/Connector Type: NEMA 5-15P
  • Receptacles: 5 x NEMA 5-15R – Battery Backup System

Power Description

  • Load Capacity: 1.50 kVA/865 W
  • Input Voltage: 110 V AC
  • Input Voltage Range: 120 V AC Nominal/88 V AC to 139 V AC Mains Operation
  • Output Voltage: 120 V AC Nominal
  • Frequency: 60 Hz Input
  • Filtering: Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time

Management

  • Overload Protection: Resettable Circuit Breaker

Battery Information

  • Batteries: Maintenance Free, Sealed, Spill Proof Lead Acid User Replaceable Hot-swappable
  • Backup/Run Time: 0.05 Hour 865 W Full Load/0.22 Hour 432.50 W Half Load
  • Battery Recharge Time: 8 Hour Typical

Physical Characteristics

  • Form Factor: Tower
  • Dimensions: 11.90” Height x 4.40” Width x 15” Depth

Certifications & Standards

  • FCC Part 15 Class B
  • FCC Part 68
  • NOM
  • TUV
  • UL 1449

Warranty
Three (3) year limited warranty from APC


What’s in the Box

  • Back-UPS BR1500G 1500 VA Tower UPS
  • CD with Software
  • USB Cable
  • User Manual

Manufacturer Product#: BR1500G

Reviews

Share your experience on a product with others.

Add a review.

No reviews of this product yet, you could be the first!

V 10.10.10.13