iPort LaunchPort AP.5 Sleeve w/Buttons for iPad Air and iPad Pro 9.7inch - White

Click or Tap to Enlarge

MFR Part #:
Part #:
Ships in 7-10 Days

Ships in 7-10 Days


Fits: iPad Air 1 and 2, and iPad Pro 9.7inch

The LaunchPort with Buttons system consists of 3 parts: a Station, a Sleeve and Sleeve Buttons. Sleeve Buttons replace the standard top that ships with a Sleeve, adding buttons to the Sleeve. Sleeve Buttons models exist to match LaunchPort Sleeve models and colors.

Sleeve Buttons communicate via Lutron’s Clear Connect one way 434MHz (or 868MHz if in UK / EU) protocol to a variety of Lutron network bridges and repeaters. The Lutron network bridge converts clear connect button-press commands onto an IP network. Using Lutron drivers, Sleeve Buttons can be monitored by the control processor of the control system of your choice. In most cases, the Lutron Caséta Smart Bridge Pro is the only network bridge required to allow Sleeve Buttons to communicate with your control system.

Sleeve Buttons are set up as a “phantom keypad” in the control system, button presses are monitored and programmed to enact macros or commands in the control system. The extent of LaunchPort Sleeve Buttons functionality is dependent on the capabilities of the control system you are using.

Note: Some control systems may not provide functionality outside of lighting and shade control, depending on how the Lutron Driver is written.

Share your experience on a product with others.

Add a review.

No reviews of this product yet, you could be the first!